Model Features Summary . . . . . . . . . . . . . . . .3 - 4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 6
OWNER’S MANUAL
• Mounting Guidelines
5
6
6
Dear Whistler Owner,
• Windshield Mounting
• Power Connection and Fuse Replacement
If you have questions concerning the operation of this
Whistler product please call:
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 17
•
Power On, Self Test
7
7
• Teach/Tutorial Mode
• Setting Saver
C
usto
me
r
Service
Service
7
• Feature Engaged Confirmation
7
XTR-
®
1-800-531-0004
1-800-531-0004
• Integrated Real Voice
7
• Audio Level Adjustment
• Auto Quiet Mode
8
Monday - Friday • 8:00 am - 5:00 pm CT
690SE/695SE
Total Band Protection™
LASER-RADAR
8
• Quiet Mode
8
or visit our website
• External Audio Jack (XTR-695SE only)
• Backlit Buttons (XTR-695SE only)
• City/City 1/ City 2 Mode
• Highway Mode
8
8
9
Please keep the receipt in a safe place. You may
register your product online at www
9
..wwhhiissttlleerrggrroouupp..
com.
• Vehicle Battery Monitor
• Low Profile Alert Periscopes
• Compass Mode
9
10
10
10-11
11
11
12
13
14
15
15
16
16
17
17
For warranty verification purposes, a copy of your dated
store receipt must still accompany any unit sent in for
warranty work. If the unit is returned without a dated store
receipt, an out of warranty service charge applies. Note:
Your warranty period begins at the time of
purchase. The warranty is validated only by the
dated store receipt! Please record the serial number
of the unit in the space provided in the warranty
section of the manual.
DETECTOR
• Backlight Setting - Dim/Dark
• 7 Color Multi-band Display (XTR-695 only)
• Vehicle Battery Saver Mode
• Filter Mode
• Option Select Mode - Stay Alert Feature
™
• Safety Warning System
The Whistler Group Corporate Headquarters
3604 NW Frontage Rd. • Bentonville, AR 72712
Tel 479.273.6012 • Fax 479.273.2927
• Alert Priority
• Compass Calibration Set-up
• Reset Features
®
• Intellicord
• Ka RSID
• LSID
Customer Return Center
551 N. 13th St. • Rogers, AR 72756
To fully acquaint yourself with the operation of your
Whistler detector and to better understand the
differences between detecting radar, laser, and
safety radar signals, we recommend reading this
entire manual or visiting our F.A.Q. page on our
POP™ Mode Alerts . . . . . . . . . . . . . . . . . . . . . .18
Laser/Radar Alerts . . . . . . . . . . . . . . . . . . . . . .18
Customer Service Tel 800.531.0004
• Speed Radar Audio/Visual Alerts
18
18
18
www.whistlergroup.com
One or more U.S. patents may apply:
#5,146,227, #5,379,456, #5,666,120,
#5,990,821, #7,215,276
• Laser Audio/Visual Alerts
®
• Pulse Protection
Troubleshooting Guide . . . . . . . . . . . . . . . . . . .19
Care and Maintenance . . . . . . . . . . . . . . . . . . .20
Are Detectors Legal? . . . . . . . . . . . . . . . . . . . .20
FCC Information . . . . . . . . . . . . . . . . . . . . . . . .20
whistlergroup
website www.
.com
P/N 260023,
©
2009 The Whistler Group, Inc.
Enjoy your Whistler detector and please drive
safely.
Speed Monitoring . . . . . . . . . . . . . . . . . . . .21 - 23
™
• POP Mode
21
21 - 22
22
22 - 23
23
• Laser Facts
• Radar Facts
• Other Speed Detection Systems
• Radar Detector Detector
Sincerely,
The Whistler Group, Inc.
Warranty Information . . . . . . . . . . . . . . . . .23 - 26
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .26
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
INSTALLATION
OPERATION
OPERATION
Important: Some newer cars have a plastic safety
coating on the inside of the windshield. The
windshield bracket may leave permanent marks on
this type of surface. To find out if your vehicle has
this type of windshield, check the vehicle’s owner’s
manual or ask your dealer. We recommend that you
do not leave the suction cup bracket on the window
in direct sunlight. If the detector is removed, this
may cause blistering of the dash in some
vehicles.
Audio Level Adjustment
Power On, Self Test
To change the audio level:
• Move Power/Volume button back to increase
audio level.
• Move Power/Volume button forward to
decrease audio level. As audio level is
adjusted, beeps are provided and the display
indicates volume level.
To turn the unit ON or OFF, push the center of
the Power/Volume button.
Each time your Whistler detector is turned on,
an automatic self-test sequence confirms that
the speaker and visual displays are functional.
• Display shows in order:
1. WHISTLER 2. X-band 3. K-band 4. Ka-band
.
5. LASER NORM 6. SR OFF 7. VOICE ON
Auto Quiet Mode
8. POP ON 9. BSVR 3 10. FILTER 11. COMBO
12. HIGHWAY
Auto Quiet mode reduces the selected audio level
to level (1) approximately 5 seconds after a radar or
safety radar signal is detected. The alert for any
new signal within 20 seconds will resume at level (1).
Auto Quiet mode does not affect laser alerts.
• Press Quiet (before a signal is detected) to
engage Auto Quiet mode.
• Slide the detector onto the bracket until it locks into
place.
• If necessary, the unit may be leveled by bending
the windshield bracket. Press the bracket release
button and remove the detector before bending.
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and Quiet buttons simultaneously
• Display Shows:
Power Cord Connection
• Plug the small end of the power cord into the
unit’s power jack.
• Plug the large end into the vehicle’s cigarette
lighter socket.
• Press Dark button to exit.
• Once the Auto Quiet mode is engaged, you
may cancel the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to
cancel Auto Quiet mode.
Setting Saver
Setting Saver saves your personalized settings
so that when the detector is turned off and then
on again, you do not have to re-enter them.
Quiet Mode
Note: Cord fits tightly into detector. When
Quiet mode cancels audio during an alert and any
new alert within 20 seconds. After 20 seconds of no
radar signal detected, the audio alerts are
restored.
installing the cord, expect some resistance.
Feature Engaged Confirmation
Each time a button is pressed, one beep confirms
feature “on”, two beeps confirm feature “off”.
Fuse Replacement
• Press Quiet to cancel the audio.
• Press Quiet a second time during an alert to
restore the standard audio alert pattern.
®
The lighter socket plug is equipped with a
replaceable 2 amp, 3AG fuse located behind the
silver tip. To replace the fuse, carefully unscrew
the tip of the plug.
Integrated Real Voice
When selected, Real Voice® will be used to
articulate the following:
1. Band Identification
2. Safety Warning System messages
3. Feature Selection
External Audio Jack (XTR-695SE only)
The 2.5mm external audio jack can be used to
connect an external speaker or headphones in
environments with high ambient noise levels. The
internal speaker will be disconnected.
Important: Unscrew slowly. The tip contains a
spring which may fly out when disassembling.
Insert the new fuse with the spring and screw on
the tip. With use, screw cap on plug may loosen.
Retighten occasionally.
Note: In certain cases, the voice message does not
replicate the text message.
Backlit Buttons (XTR-695SE only)
Function buttons are illuminated for ease of use.
7
8
6
OPERATION
OPERATION
OPERATION
City/City 1/City 2 Mode
Low Profile Alert Periscopes
Backlight Setting (continued)
Whistler’s Three Stage City Mode is designed to
reduce the annoyance of automatic door openers,
intrusion alarms and other devices which share frequencies
with police radar. Generally, X band is used for these
devices.
• Press City button to cancel Highway Mode
and engage City Mode.
• Press City button again to enter City 1 Mode.
• Press City button again to enter City 2 Mode.
• Press City button a fourth time to cancel City 2
Mode and returns the unit to Highway Mode.
Backlight will turn on, if selected, while the unit alarms
Whistler’s Low Profile Alert Periscopes provide an added
attention getting visual alert. The two extra LEDs flash on
and off when the unit alarms to provide a unique visual alert.
This alert can be programmed, through the Option Select
Mode to: 1. flash for all alarms, 2. remain on, or 3. turn LEDs
off completely.
and remain on for
3
seconds after the unit stops
alarming. When any button is pressed, the backlight
will illuminate at the dim setting and remain on for 3
seconds afterwards. The backlight will also illuminate
while in option mode.
Dim/Dark Mode (XTR-690SE only)
Compass Mode
Dim/Dark Mode reduces the illumination of the display.
The unit is programmed from the factory in “Combo
Mode”. COMBO mode means that the unit provides
both compass headings as well as detects laser/radar
signals. Through the “Option Select Mode”, either
laser/radar or compass features can be turned off;
RADAR equals detection of all police bands and laser;
COMPASS equals no detection of police laser/radar.
•
Press the Dark button to reduce illumination to a
Dim setting.
•
Pressthe Dark button a second time engages
Dark Mode. The display illumination is further
reduced.
In City Mode, weak speed/safety radar signals give
an initial alarm of two beeps, and then remains
quiet until the signal becomes very strong. When
the signal strength increases, two additional beeps
are provided. City 1 and City 2 Modes operate the
same as Highway Mode, but in City 1 Mode, only the
X band sensitivity is lowered. In City 2 Mode, X-band
is not detected.
Dim or Dark Mode can be engaged during an alert. In
Dark Mode, the display goes dark for as long as a
signal is being detected and for 20 seconds after, then
the display returns to the dimmer setting.
Note: The unit must be calibrated to provide accurate
compass headings. See Compass Calibration Set-up
section on page 15.
•
Press the Dark button a third time to restore full
illumination to the display.
Caution: Some towns/small cities may still be using X
band radar. City Modes do not change the audio alert
for laser.
Backlight Setting (XTR-695SE only)
7 Color Multi-band Display
The backlighting can be programmed to be illuminated
all the time, only when alarming, or various other
combinations. The options are selectable by pressing the
Dark button on the unit. The first condition is during
normal operation and the second is when the unit alarms.
(XTR-695SE only)
The display can be set so that each Band alert can be
a different color (i.e. K Band alerts in Blue, X Band
alerts in Green, Ka Band alerts in Purple, etc,) or Scroll
ALL colors while alarming. To make changes see
Option Select Mode steps 17 thru 20 on page 13.
Highway Mode
Highway mode provides full audio warnings any
time radar (X, K, Ka, Safety Radar) or laser signals
are detected, and is recommended for open road
driving.
The options are:
Vehicle Battery Saver Mode
Normal
-
Alarm
OFF
H
CC
Note: In Combo Mode, an “H” or “ ” will be shown to
The Vehicle Battery Saver Mode automatically shuts off
the detector after 3 hours. The timer is reset if the
detector is turned off, unplugged or any button is pressed
before the timer has expired. The detector will alert you
with an audible and visual warning before it shuts off.
During this warning, you can momentarily reset the timer
by pressing any button. If the unit has automatically turned
off, press any button to turn the unit back on. Refer to
“Option Select Mode” for instructions for changing
the battery saver mode options.
indicate mode of operation.
OFF
-
For more information on City and Highway modes, please visit
our F.A.Q. page on our website: www.whistlergroup.com
OFF
OFF
DIM
DIM
DIM
BRT
-
-
-
-
-
-
DIM
BRT
OFF
DIM
BRT
BRT
Vehicle Battery Monitor
The vehicle’s battery voltage can be displayed
by pressing and holding the Dark and Quiet
buttons simulatneously. Pressing Dark and Quiet
simultaneously again will exit the battery
monitor.
10
9
11
OPERATION
OPERATION
OPERATION
Filter Mode
Stay Alert Feature
Option Select Mode
There are times when a radar detector in another
vehicle, can unintentionally emit frequency
The Stay Alert Feature is designed to test a driver’s
alertness. To engage (when the unit is not alarming) :
Press the Menu button to enter Option Select Mode.
When selecting options, the Dark or Quiet buttons must
be pressed within 20 seconds or Option Select Mode will
automatically exit. To enter:
a
which can cause your detector to falsely alarm.
The Whistler Filter Mode options provide
additional signal processing to minimize the
occurrences of these false alarms. Filter mode
provides normal processing. Filter 1 and Filter 2
modes provide additional signal analysis before
alarming.
• Press and hold the City button for
approximately 2 seconds. Release the button
during or immediately after the alert is given.
Display shows:
Within 30-60 seconds, two beeps are sounded;
to show alertness, the driver must press either the
City, Menu, or Quiet buttons within 3-5 seconds. If a
button is pressed within 3-5 seconds, the cycle is
repeated.
Filter Mode is the factory default setting and
should provide adequate filtering for most
conditions. If you experience excessive alerts
due to radar detectors in other vehicles, try Filter
1, then Filter 2 modes. Filter Mode analysis
occurs in Highway Mode and all City Modes. See
Option Selection Mode to change the filter
settings.
If a button is not pressed within 3-5 seconds, an
alarm sounds and the display shows:
• Press the Dark button to exit the Stay Alert feature.
WARNING!!! Stay Alert is NOT intended as a
substitute for adequate rest. You should NOT
operate a vehicle if you are drowsy. During
extended periods of vehicle operation, you should
take frequent breaks. Improper reliance on the Stay
Alert feature may result in vehicle damage,
personal injury or death. NEVER OPERATE A
VEHICLE IF YOU ARE DROWSY.
Ka Max Mode
Ka Max Mode provides enhanced Ka sensitivity -
increased protection. This mode can be selected
with or without RSID. See Option Select Mode
for changing Ka options.
™
SWS
Safety Warning System™
In communities where transmitters are located,
the Safety Warning System™ displays over 60
text messages. When Safety Radar is detected
the audio alert is geiger counter-like.
Safety Warning System Text Message
Example: Poor - Road - Surface.
Note: Not all areas have Safety Warning System™
transmitters.
Press the Power button to exit Option Select Mode.
12
13
14
OPERATION
OPERATION
OPERATION
Whistler has two new exciting features that will assist
the driving enthusiast to further identify threats from
laser and Ka band radar guns.
Alert Priority
Reset Features
When two or more signals are received at the
same time, the alert priority is:
1. Laser 2. Speed Radar 3. Safety Radar
Example: If X band is alerting, then suddenly a
laser signal is detected, the laser warning will
override the X band alert.
All user features can be reset to factory settings.
•Unplug the Power Cord from the unit.
•Press and hold the Power and Quiet buttons.
•Plug the Power Cord into the unit.
•Wait for 2 beeps.
•Release the Power and Quiet buttons.
Unit is now reset to the following features
and settings.
Ka RSID (Ka Radar Signal IDentifier)
Identify the difference between the likelihood of a Ka
threat vs. the likelihood of a Ka false from another
source (possible radar detector). The Ka RSID
feature will educate you to the common Ka speed
radar guns by displaying the nominal police radar
Compass Calibration Set-up
The unit must be calibrated in order for the
compass to provide accurate headings. To
calibrate the unit, perform the following
procedure:
frequencies of 33.8GHz
/
34.0GHz
/
34.3GHz
/
34.7GHz / 35.5GHz. The Ka alerts that do not fall into
the common Ka speed radar windows will be reported
only as Ka.
Default factory settings are:
1. S1: (For Intellicord®) Power ON or OFF.
2. S2: (For Intellicord®) Quiet feature.
3. Combo Mode.
Note: This product is not a frequency counter. The
unit will categorize the received Ka signal and select
the appropriate information. Treat every Ka alert with
caution.
1. Mount the unit level in the center of the
vehicle’s windshield. Make sure there are no
magnetic sources near the detector
(i.e., speaker).
4. HIGHWAY Mode.
5. Dim/Dark Mode to full illumination of display.
6. Auto Quiet Mode OFF.
7. Safety Radar OFF.
8. Vehicle Battery Saver ON/3hrs.
9. Full Power Up sequence.
10. Default TONE 3.
LSID (Laser Signal IDentifier)
Identify the Laser gun’s pulse rate or PPS (Pulses Per
Second) that is transmitted by the speed laser gun.
LSID may also be used to identify other forms of laser
sources such as LACC (Laser Assisted Cruise Control)
systems found in some high end vehicles.
2. Select a large clear area (parking lot or field)
without any power lines.
3
. Press the Menu button until display shows
CAL MODE. Then press the Dark and Quiet buttons
simultaneously. The display shows (scrolling):
11. All Bands ON.
If the Laser PPS information displayed is due to
another source such as local airports or LACC, LSID
allows you to Lock Out this rate from giving you the
continuous audio alert during this and any new
encounter of the same rate. To Lock Out a PPS, press
the Quiet button during the Laser alert. This will
place an * on the screen beside the PPS rate and
Lock Out this signature ID. Any new encounter with
the same Laser Signature ID will provide the display
information and two quick beeps.
12. Laser ON.
13. POP ON.
14. Voice ON.
4. If calibration does not automatically finish, press
the Dark and Quiet buttons simultaneously to
complete calibration. The unit will beep twice and
display shows, for example:
15. LED Periscopes to BLNK.
16. Filter Mode.
Intellicord® Ready
Using Whistler’s optional Intellicord® Power Cable
allows some models to control the detector’s
features such as Power On/Off, City Modes,
Dim/Dark, and Quiet/Auto Quiet with a simple
press of the button on the Power Cable. Two
features can be controlled: one by a short press of
the button, and the second by a long press of the
button. Option Mode allows the user to program
the feature assignments.
H
C
Note: In Combo Mode, an “ ” or “ ” will be
shown to indicate mode of operation.
Note: Common Laser PPS rates used in the USA are
100 / 125 / 130 / 200 / 238 / 380Hz. Other Laser PPS
rates used outside the USA include 600Hz.
Important: If unit mounting is relocated in the
vehicle, (i.e., visor to windshield mounting or
dash mounting), or if the unit is moved to
another vehicle, you must recalibrate the
compass.
Caution: Do not lock out a PPS rate if it is close to
known speed laser guns.
15
16
17
™
POP MODE ALERTS
TROUBLESHOOTING
CARE AND MAINTENANCE
™
Your Whistler detector is expertly engineered
and designed to exacting quality standards to
provide you with reliable, trouble-free operation.
If your unit has been correctly installed following
the guidelines in this manual, but is not
operating optimally, please refer to the
troubleshooting guide below.
During the summer months, avoid prolonged
exposure to direct sunlight by removing your unit
from the dash when your vehicle is parked for an
extended period of time. Do not spray water,
cleaners, or polishes directly onto the unit. The
spray may penetrate through the openings and
damage the unit. Also, do not use any abrasive
cleaners on the unit’s exterior.
POP Mode Alerts
Because POP™ Mode radar utilizes the same
K or Ka band frequencies, POP™ Mode Alerts will be
displayed as regular radar alerts.
LASER/RADAR ALERTS
Speed Radar Audio/Visual Alerts
When X, K or Ka is detected, the band ID and
signal strength are displayed. The audio alert is
continuous and has a geiger counter-like
pattern. The faster the beep, the closer or
stronger the radar source.
PROBLEM: No display or audio.
• Check fuse in plug; replace if necessary with a
2 amp, 3AG type.
• Check fuse for lighter socket; replace if
necessary.
• Make sure lighter socket is clean.
ARE DETECTORS LEGAL?
In Most States YES.
Laser-Radar detectors are legal in every state
(except Virginia and Washington, D.C., which have
local regulations restricting the use of radar
receivers in any vehicle) when used in
automobiles or light trucks (under 10,000 lbs.).
Laser Audio/Visual Alerts
When a laser signal is detected, the audio alert is
continuous for a minimum of 3 seconds.
PROBLEM: Unit alarms when vehicle hits
bumps.
• Check for loose lighter socket; tighten and
clean.
• Check connections at both ends of the power
cord. Substitute another cord to determine if
the cord is defective. Return defective cord to
the factory.
• The Displays Shows:
The Federal Highway Administration (FHWA)
issued a regulation, effective January, 1994 which
prohibits radar and laser detector use in vehicles
over 10,000 lbs. Prior to the FHWA regulation,
laws existed in New York restricting the use of radar
detectors in trucks over 18,000 lbs. and in Illinois in
trucks over 26,000 lbs.
®
Pulse Protection
Pulse (or instant-on) radar is more difficult to
detect than conventional radar because it
remains ‘off’ until activated to measure the speed
of a targeted vehicle.
PROBLEM: Audio alerts are not loud
enough.
• Cancel Auto Quiet Mode or City Mode.
• Check audio level setting (see page 8 ).
When a pulse type transmission is detected, your
Whistler detector sounds an urgent 3-second
audio warning and the display shows:
FCC INFORMATION
If difficulties occur which cannot be solved by
information in this Troubleshooting Guide, please
call Whistler Customer Service at 1-800-531-0004
or visit our F.A.Q. page at
www.whistlergroup.com/faq-detectors.asp,
before returning your unit for service.
FCC ID: HSXWH20
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
After the 3-second pulse alert, the standard alert
pattern continues for as long as the signal is
present.
It is important to respond promptly to a pulse
alert, since warning time may be minimal.
(1) This device many not cause harmful interference,
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Important: FCC requirements state that changes or
modifications not expressly approved by Whistler could
void the user’s authority to operate the equipment.
18
19
20
SPEED MONITORING
SPEED MONITORING
SPEED MONITORING
POP™ Mode
Laser Tips
Radar Detector Detectors: VG-2,
POP™ Mode is a feature on some newer radar
guns operating on K and Ka bands. When the gun
is in POP™ Mode and activated, a brief burst of
energy, less that 1/15 of a second, is transmitted
and the vehicle’s speed is quickly acquired. A
detector without POP™ Mode detection capability
cannot respond to this brief transmission.
If you are the targeted vehicle, a laser gun can
often determine your speed within a few
seconds after you receive an alert. In this
situation, there is generally no time to safely
adjust your speed. However, if you are traveling
near or behind the targeted vehicle and receive
an alert, response time should be sufficient. Any
laser alert, regardless of duration, requires
immediate action.
Spectre
The Interceptor VG-2 or simply VG-2, is one type of
microwave receiver used by Police to detect signals
radiated by the local oscillator of a radar detector.
Because its purpose is to identify persons driving with
radar detectors, these devices are known as a “radar
detector detector” (RDD).
An RDD is the primary tool used by the police to identify
radar detector equipped vehicles. If caught in a state or
country where detectors are illegal (see page 20), drivers
risk losing their radar detector and receiving a fine. In
addition, instant-on radar is almost always used in
combination with an RDD, leaving unsuspecting
motorists vulnerable to receive two tickets; one potential
for speeding, and the other for possession of a detector.
Note: The newest tool Police have to detect radar
detectors is called Spectre. Spectre can detect the
majority of undetectable (VG-2) laser/radar detectors
on the market.
Laser Facts
It’s well documented that many radar guns
cannot reliably provide the speed of a targeted
vehicle that is traveling in a group of vehicles. In
contrast, a laser gun can target a specific vehicle
out of a line of traffic and determine its speed. The
advantage of laser over radar in terms of
target identification is the result of the laser gun’s
narrow beam. A radar gun’s transmission can
cover more than a four-lane highway at a distance
of 1,000 feet, compared with a laser gun’s
transmission which covers about 3 feet at the
same distance. For best protection, keep these
points in mind:
Radar Facts
A radar gun operates by transmitting radio
waves at certain frequencies which reflect off
objects and are picked up by the radar gun’s
receiving section. When a radar beam reflects
off a moving target, a measurable frequency shift
occurs. The radar unit converts this shift into miles
per hour to determine your vehicle’s speed.
Currently, the FCC (Federal Communications
Commission) permits operation of traffic radar
guns at X Band (10.500 - 10.550 GHz), K Band
(24.050 - 24.250 GHz), and Ka Band (33.400 -
36.000 GHz).
It is the responsibility of the individual radar detector
user to know and understand the laws in your area
regarding the legality of the use of radar detectors.
• Because the vehicle’s license plate or
headlights are the laser gun’s primary targets,
mounting the Whistler detector on the
dashboard can improve laser detection at short
range.
• Do not follow closely behind any vehicle you
cannot see through. If you can’t see past a
vehicle ahead of you, chances are your detector
can’t either.
• The receiving range of your laser detector will
not be the same as a radar detector. Laser guns
are most often used at short range.
WARRANTY INFORMATION
Note: A radar detector will only alarm if an
officer is transmitting on any one of the above
radar bands.
Consumer Warranty
This Whistler Laser-Radar detector is warranted to
the original purchaser for a period of three years from
the date of original purchase against all defects in
materials and workmanship. This limited warranty is
void if the unit is abused, modified, installed
improperly, or if the housing and/or serial numbers have
been removed. There are no express warranties covering
this product other than those set forth in this
warranty. All express or implied warranties for this product
are limited to the above time. Whistler is not liable
for damages arising from the use, misuse, or operation
of this product.
Other Speed Detection Systems
Several techniques other than radar or laser are
used to measure vehicle speeds. When these
methods are being used, no detector can provide
a warning. These techniques include:
Pacing
• P
- A patrol car drives behind you and
Whistler Laser-Radar detectors receive all current
laser guns which operate at a laser wavelength of 905
+/- 10nm.
matches your driving speed.
• Vascar/Aircraft - The police measure the time it
takes your vehicle to travel a known distance.
21
22
23
WARRANTY INFORMATION
WARRANTY INFORMATION
3. Be certain your unit is returned with its serial
number. For reference, please write your unit’s
serial number in the following space:
s/n______________.
Service Under Warranty
During the warranty period, defective units will
be repaired without charge to the purchaser when
returned with a dated store receipt to the address
below. Units returned without a dated store
receipt will be handled as described in section
“Service Out Of Warranty.”
Due to the specialized equipment necessary for
testing a Laser-Radar receiver, there are no
authorized service stations for Whistler brand
detectors other than Whistler.
Units without serial numbers are not covered under warranty.
Important: To validate that your unit is within
the warranty period, make sure you keep a
copy of your dated store receipt. You may
register your warranty online at
warranty verification purposes, a copy of
your dated store receipt must accompany any
unit sent in for warranty work.
When returning a unit for service, please follow
these instructions:
Service Out of Warranty
Units will be repaired at “out of warranty”
service rates when:
1. Ship the unit in the original carton or in a
suitable sturdy equivalent, fully insured, with
return receipt requested to:
• The unit’s original warranty has expired.
• A dated store receipt is not supplied.
• The unit has been returned without its serial
number.
Whistler Repair Dept.
551 N. 13th St.
Rogers, AR. 72756
• The unit has been abused, modified,
installed improperly, or had its housing
removed.
Please allow 3 weeks turnaround time.
Important: Whistler will not assume
responsibility for loss or damage incurred in
shipping. Therefore, please ship your unit
insured with return receipt requested.
CODs will not be accepted!
2. Include with your unit the following
information, clearly printed:
The minimum out of warranty service fee for
your Whistler detector is $75.00 (U.S.). If you
require out of warranty service, please return
your unit as outlined in the section “Service
Under Warranty” along with a certified check or
money order for $75.00. Payment may also be
made by MasterCard, VISA, or American
Express; personal checks are not accepted.
In the event repairs cannot be covered by the
minimum $75.00 service fee, you will be
contacted by a Whistler technical service specialist
who will outline options available to you. If you
elect not to have your unit repaired, it will be
returned to you along with your certified check
or money order.
• Your name and street address (for
shipping via UPS), a daytime telephone
number and an email address, if applicable.
• A detailed description of the problem (e.g.,
“Unit performs self-test but does not respond
`
to radar”).
• A copy of your dated store receipt or bill of
sale.
24
25
WARRANTY INFORMATION
ACCESSORIES
Important: When returning your unit for service,
be certain to include a daytime telephone
number and an email address (if applicable).
These and other accessories can be
ordered directly from Whistler by calling
1-800-531-0004 or visiting our online store
at www.whistlergroup.com
Customer Service
If you have questions concerning the operation of your
Whistler detector, or require service during or after the
warranty period, please call Customer Service at:
Order #
500501
403774
202152
206552
206553
206880
Descriiption
Zipped Travel Case
Intellicord®
Price
$ 9.95
$27.95
$ 9.95
$14.95
$15.95
$ 9.95
1-800-531-0004
Representatives are available to answer your questions
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or visit
the F.A.Q.’s at www.whistlergroup.com.
Large Windshield Bracket Kit
Straight Power Cord (5’)
Coiled Power Cord (7’)
SPECIFICATIONS
Radar Frequencies:
Hardwire Kit (10' )
(for wiring to fuse box)
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
206666
Modular* Cord Package
(includes coiled and straight
cords, and power adapter)
$17.95
202156
402081
206660
Package of 4 Suction Cups
Non Skid Dash Pad
$ 2.95
$ 6.95
Operating Temperature Range:
-10 C to +70 C (-41 F to +158 F)
Straight Modular Cord &
Socket Multiplier
Power Requirements:
$11.95
$12.95
Operational 12 to 15 volts DC, 250mA nominal
Vehicle Battery Saver, 30mA nominal.
206661
Coiled Modular Cord &
Socket Multiplier
One or more U.S. patents may apply:
#5,146,227, #5,379,456, #5,666,120, #5,990,821
#7,215,276
POP™ Mode is a trademark of MPH Industries, Inc.
* Modular: Interconnecting pieces cord and plug.
Shipping and handling (per order) $5.00 . Prices
are subject to change without notice.
SWS™ is a trademark of Safety Warning
System L.C.
Specifications are subject to change without notice.
26
27
|