INSTRUCTION BOOKLET
SD 2811 W
Spin Dryer
Instructions for use
Contents
Page
Important Safety Information
Contents
2
3
3
4
5
6
6
7
8
Description of Parts
Illustrations
Operating Instructions
Maintenance and Care
Something not Working
Service and Spare Parts
Terms and Conditions of Guarantee
Description of Parts
1 = Lid
4= Carrying Handle
5= Plug
7 = Outer Casing
8 = Outlet Spout
9 = Foot
2 = Operating Lever
3 = Cable Storage
Fixture
6= Mains Cable
10 = Rating Plate
3
4
1
2
7
5
8
9
6
10
3
Illustrations
A
C
E
B
I
0
250cm
50 cm
D
ca. 3 cm
1"
4
Operating Instructions
Congratulations on your new
purchase
We recommed that you read these instructions care-
fully in order to quickly become familiar with your
new appliance.
Switch on the appliance
Turn the operating lever to the right as far as it
will go to the “ON” (I) position.
A
The spin dryer is now in operation and water flows
out of the outlet spout.
A good appliance, which is used properly, will
serve you for many years.
Spin Drying Times
• For normal washing: 3-5 minutes.
The residual moisture amounts to:
approx: 65% in machines with a spin speed of
1400 rpm;
Unpacking the appliance
Dispose of packing materials in accordance with
local regulations and with due regard to safety. Risk
of suffocation!.
approx: 40% in machines with a spin speed of
2800 rpm;
Check the spin dryer for any transport damages,
which must be reported to the retailer or delivery
company responsible within 7 days.
• For washing which requires no ironing:
15-30 seconds max.
Switch off the appliance
Preparation for Use
1. Put the operating lever in the “OFF” (0)
position.
A
When water ceases to flow out of the outlet spout,
or when the spin process is to be terminated, turn
the operating lever back to the left to the “OFF” (0)
position.
2. Open the lid.
3. Remove the transport safeguard from inside
the spin drum.
When the drum has come to a standstill, open the
lid. A special safety device prevents the lid being
opened before the drum has stopped spinning.
4. We recommend that the spin drum be wiped with
a wet cloth using a solution of water and mild
E
washing up liquid. Before using
Never force the lid open
Remove the laundry from the drum.
B
for the first time.
5. Place the spin dryer on a level floor at a
distance of about 50 cm away from the
wall or other objects. Never balance out
irregularities in the floor surface by laying
wood, paper or similar materials under the
appliance.
Gently tilt the spin dryer forward, so that any
remaining water can flow out of the outlet spout.
Switch off the power supply. Pull out the plug.
Loading the machine
1. Place a sufficiently large container for excess
water under the outlet spout.
E
2. Plug the appliance in to a mains socket
(please observe the Points of Safety).
C
3. Place each article of laundry singly in the
spin drum. Distribute the washing evenly
in the drum and press down firmly, so as to
avoid leaving empty spaces (and thus avoiding
excessive vibration of the machine during
operation).
4. Press the loaded washing down, so that
D
there is a gap of at least 3 cm between the
washing and the top edge of the drum.
Lastly, cover the washing with a cloth, the ends
of which should be tucked well down inside the
drum, so as to avoid items of washing being
catapulted out during operation.
5. Close the lid.
5
Maintenance and Care
If unexpected difficulties arise
• Always switch off the power supply pull out the
plug before cleaning the appliance!
• After use, wipe the spindrum dry with a cloth.
• Before contacting your local Service Force
Centre, check whether the fault is due to one of
the following minor causes.
• If dirty washing has been spun, it is necessary
to rinse the drum out with clear water in order to
avoid soiling the next load of washing.
The motor does not function:
• Clean the exterior of the spin dryer with a damp
• Has the fuse blown?
cloth and wipe it dry.
• Is there damage to the mains cable, plug or
socket? Turn off the power supply. Pull out the
plug before checking!
• Use a solution of water and mild washing up
liquid only to clean the appliance.
• Do not use abrasive cleaning agents.
• Never use petrol or other solvent liquids.
• The spin dryer requires no other maintenance.
• Never open the motor yourself!
Water does not flow out:
• Switch off the power supply. Pull out the plug!
Check whether the outlet spout is blocked by a
piece of washing.
• Press the spin drum from the inside against the
outer casing with your hand and remove the
piece of washing.
The spin dryer does not pick up spin
speed:
• Please note that the spin dryer normally
overcomes a certain amount of unbalance itself
when picking up spin speed. The motor and spin
drum are suspended flexibly for that reason.
• However, if the unbalance is too great (brought
about by incorrect loading of the spin dryer),
the machine cannot pick up spin speed.
The spin dryer “jumps”:
1. Switch off the spin dryer immediately!
2. When the drum has come to a standstill, repack
the washing evenly.
3. Reload the spin dryer in accordance with the
Model
SD
2811W
Filling amount (Kg)
3,0
2800
56
Spin speed
(r.p.m.)
Height (cm)
6
SERVICE AND SPARE PARTS
CUSTOMER CARE DEPARTMENT
In the event of your appliance requiring service, or
if you wish to purchase spare parts, please contact
your local Service Force Centre by telephoning:-
For general enquiries concerning your Electrolux
appliance or for further information on Electrolux
products, please contact our Customer Care Depart-
ment by letter or telephone at the address below or
08705 929929
Your telephone call will be automatically routed to
the Service Force Centre covering your post code
area.
For the address of your local Service Force Centre
and further information about Service Force, please
Before calling out an engineer, please ensure you
have read the details under the heading “Something
Not Working.”
When you contact the Service Force Centre you will
need to give the following details:
Customer Care Department
Zanussi-Electrolux
55-77 High Street
Slough
Berkshire
SL1 1DZ
08705 950950 (*)
* calls to this number may be recorded for training
purposes.
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of the fault
4. The model and serial number of the appliance
(found on the rating plate)
5. The purchase date Please note that a valid
purchase receipt or guarantee documentation is
required for in-guarantee service calls.
7
GUARANTEE CONDITIONS
European Guarantee
Standard guarantee conditions
If you should move to another country within Europe
then your guarantee moves with you to your new
homesubject to the following qualifications:
The guarantee starts from the date you first
purchased your product.
The guarantee is for the same period and to the
same extent for labour and parts as exists in the
new countryof use for this brand or range of
products.
This guarantee relates to you and cannot be trans-
ferred to another user.
Your new home is within the European Community
(EC) or European Free Trade Area.
The product is installed and used in accordance
with our instructions and is only used domestically,
i.e. anormal household.
The product is installed taking into account regulati-
ons in your new country.
Before you move please contact your nearest Custo-
mer Care centre, listed below, to give them details
of yournew home. They will then ensure that the
local Service Organisation is aware of your move
and able to lookafter you and your appliances.
We, Zanussi-Electrolux, undertake that if within
12 months of the date of the purchase this Zanussi-
Electrolux appliance or anypart thereof is proved to
be defective by reason only of faulty workmanship
or materials, we will, at our optionrepair or replace
the same FREE OF CHARGE for labour, materials or
carriage on condition that:
The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.
The appliance has been used for normal dome-
stic purposes only, and in accordance with the
manufacturer’sinstructions.
The appliance has not been serviced, maintained,
repaired, taken apart or tampered with by any
person notauthorised by us.
All service work under this guarantee must be
undertaken by an Zanussi-Electrolux Service Force
Centre. Any applianceor defective part replaced
shall become the Company’s property.
This guarantee is in addition to your statutory and
other legal rights.
Home visits are made between 8.30am and
5.30pm Monday to Friday. Visits may be available
outside thesehours in which case a premium will be
charged.
France
Senlis
+33 (0)3 44 62 20 13
Germany Nürnberg +49 (0)800 234 7378
Exclusions
This guarantee does not cover:
Damage or calls resulting from transportation, im-
proper use or neglect, the replacement of any light
bulbs orremovable parts of glass or plastic.
Italy
Sweden
UK
Pordenone +39 (0)800 117511
Stockholm +46 (0)20 78 77 50
Slough
+44 (0)1753 219898
Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside theEuropean Community (EC) or European
Free Trade Area.
Appliances found to be in use within a commer-
cial environment, plus those which are subject to
rentalagreements.
Products of Electrolux manufacture which are not
marketed by Electrolux.
|