Slim Series
USER GUIDE
Slim8800 DECT Digital Cordless
Telephone with Answering System
Slim8000 DECT Digital
Cordless Telephone
Keep this user guide for future reference.
CONTENTS 2
To store an entry
17
17
18
18
18
19
19
19
19
20
20
Clock & Alarm
24
Entering names
To set date and time
To set alarm
24
24
24
Character map
Enter a pause
To set alarm melody
To view an entry
To edit an entry
Personal settings
25
To delete an entry
To delete all entries
To set the ring volume
To set the ring melody
To set a Group melody
To set the Key tones on/off
To change the handset name
To set auto pick up answer
To set auto hang up
25
25
25
26
26
26
26
27
27
27
To copy the phonebook to another handset
To store a phonebook entry as a speed dial number
To delete a speed dial number
Caller ID
To view the calls list
21
21
21
22
22
22
22
23
23
23
23
To set babysit mode on
To set the backlight on/off
To lock the Keypad
To dial from the calls list
To save a number from the calls list to the phonebook
To delete a calls list entry
To delete entire calls list
Advanced settings
To set the Recall time
Call barring
28
To redial the last number
To view and dial a number in the redial list
To copy a redial number to the phonebook
To delete a redial list entry
28
28
28
29
29
To switch call barring on/off
To set a number to be barred
To set the PIN
To delete entire redial list
3 CONTENTS
To Reset your Phone
29
29
30
30
To play messages
34
34
34
35
35
35
35
35
36
36
36
Auto prefix
To delete all messages
To record a memo
To set Country
To turn intrusion on
Remote access
To turn Remote Access on/off
Call screening
Registration
Register new handsets on the Slim base
To register a handset
31
31
31
31
To interrupt at the handset:
Switch handset call screening on/off
To access the answering machine menu via the Calls list
Memory full
To unregister a handset
To set TAM Language
Using the Answering system (Slim8800 ONLY) 32
Outgoing messages
32
32
32
32
33
33
33
33
34
Appendix
37
Answer & Record
Customer Support
37
38
41
42
Answer Only
Troubleshooting
To set answer mode
Warranty Information (Australia)
Notes for operation in New Zealand
To record an outgoing message
To delete a personalised outgoing message
Ring delay
To switch the answering machine on/off
New Message
GETTING STARTED 4
exposure to radio waves (EMR). The mean power of this telephone
does not exceed 20mW limit at which point testing is required.
Privacy of communications may not be ensured when using
this telephone.
The earpiece of the handset may attract small metal objects
such as staples and pins. Care should be taken when placing
the handset near these items.
Important
•
•
•
•
•
Avoid exposure of this telephone to moisture or liquid.
To prevent electric shock, do not open the handset or base cabinet.
Avoid metallic contact (e.g. metal clips, keys) between the
battery contacts and charging conductors.
•
This telephone is not designed for making emergency
telephone calls when the mains power fails. Always have a
corded phone available to be able to make and receive calls to
emergency services if the mains power fails.
Do not use your telephone during an electrical storm
thunderstorm as it is possible to get an electric shock. Refer to
information contained in White pages directory.
This phone is designed for connection to a PSTN telephone line or an
analogue extension port of a PBX system. If you connect this device
to a digital extension of a PBX, damage may result to the PBX.
•
There is a slight chance that the telephone could be damaged by
an electrical storm. It is recommended that users unplug the phone
from the mains supply and telephone socket during a storm.
Do not use the handset in an explosive hazard area such as
where there is gas leaking.
Follow the local regulations regarding the disposal of your
packing materials, exhausted batteries and used phone.
Wherever possible, recycle those materials.
This phone should not be used near intensive care medical
equipment. Persons with pacemakers should consult their
Doctor or cardiologist before using this phone.
Clean with a dry, soft, lint-free cloth. Never use cleaning agents,
particularly aggressive solvents.
Because the phone works by sending radio signals between
base station and handset, wearers of hearing aids may
experience interference in the form of a humming noise.
•
•
•
•
•
CAUTION
Use only the mains adaptors supplied with this product. Incorrect adaptor
polarity or voltage can seriously damage the unit.
Adaptor for base unit and charger:
Base Unit power supply – Input: 230-240VAC 50Hz 0.2A MAX
Output: 7.5VDC 300mA
•
•
•
•
Your phone can interfere with electrical equipment such as
answering machines, TV and radio sets, clock radios and
computers if placed too close. It is recommended that you
position the base unit at least one metre from such appliances.
This adaptor has Clear plug with offset to connect it to the base unit.
Ext Charger power supply – Input 230-240VAC 50Hz 0.2A MAX
Output: 7.5VDC 200mA
This adaptor has Red colour plug with opposite offset to base PSU to connect it
to charger base. Charger base Red colour socket.
This telephone complies with applicable safety requirements for
5 GETTING STARTED
flashes and the handset gives an out-of-range warning tone every
minute. This tone is repeated until you move back into range.
Location
You need to place your Slim base within 2 metres of the mains
power socket and telephone socket so that the cables will reach.
Installation and Charger
Make sure it is at least 1 metre away from other electrical appliances
to avoid interference. Your unit works by sending radio signals between
the handset and base. The strength of the signal depends on where
you site the base. Putting it as high as possible ensures the best signal.
1. Connect the mains adaptor (supplied) to the socket on the
back of the base unit and to the wall mains supply.
2. Connect the telephone cord to the phone socket on the back of
the base unit and into the wall phone socket.
3. Insert 2 rechargeable Ni-MH AAA batteries (included),
observing the correct polarity, into the battery compartment on
the handset. Slide the battery door firmly into place.
4. Place the handset on the charging cradle and charge the
batteries for a full 14 hours before using it for the first time.
Handset range
The Slim has a range of 300 metres outdoors when there is a
clear line of sight between the base and handset. Any obstruction
between the base and handset will reduce the range. With the
base indoors and handset either indoors or outdoors, the range will
normally be up to 50 metres. Thick concrete walls can severely
affect the range.
Select your Country
After the phone is fully charged you will need to select your country.
1. The phone will display Welcome.
Signal strength
The icon on your handset indicates when you are in range. When
out of range of the base, the screen shows SEARCHING the icon
2. Press [
].
3. Scroll [ ] or [ ] to select Australia or New Zealand.
4. Press [
5. Press [
].
] again to confirm.
GETTING STARTED 6
WARNING
Battery low warning
If the icon flashes in the display, you will need to recharge the
handset before you can use it again. During charging, the icon in
the display will scroll.
DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT, AS THERE
IS A RISK OF EXPLOSION AND/OR INJURY. USE ONLY Ni-MH RECHARGEABLE
BATTERIES AS SPECIFIED IN THIS USER GUIDE. CONTACT ORICOM FOR
REPLACEMENT BATTERIES.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Never use non-rechargeable batteries. Use recommended type supplied with
this product.
Battery performance
•
•
•
Never use alkaline or lithium batteries.
Do not dispose of the batteries in a fire, as they can explode.
Do not open or mutilate the battery. Released electrolyte is corrosive and
can cause damage to the eyes or skin. It can be toxic if swallowed.
Avoid contact with metal objects when handling the battery. These objects
could short out the batteries or cause the conductor to overheat resulting
in burns.
In ideal conditions, fully charged batteries should give about 10
hours talk time or 100 hours standby time on a single charge.
Note that new batteries do not reach full capacity until they have
been in normal use for several days.
•
The charge capacity of rechargeable batteries will reduce with
time as they wear out, giving the handset less talk/standby time.
Eventually they will need to be replaced.
•
•
•
•
Do not attempt to recharge the battery cell by heating it. Sudden release of
battery electrolyte can cause burns or irritation to the eyes or skin.
Observe the proper polarity, or direction, of any battery. Reverse insertion
of the battery cell can result in leakage or explosion.
Remove the batteries if you do not plan to use the product for several
months at a time.
Batteries and handset may become warm during charging. This is
normal.
Tip!
It is good practice to put the cordless handset on the charging cradle when it is
not in use to ensure that the handset is always fully charged.
Follow the local regulations regarding the disposal of your packing
materials, exhausted batteries and used phone. Wherever possible, recycle
those materials.
7 GETTING STARTED
purchased the product, or directly from Oricom (Australia). The Slim
can accommodate a total of 5 cordless handsets.
Pack contents
Important:
Depending on the model you have purchased this pack should
contain the following items:
DO YOU HAVE BROADBAND/ADSL?
If any of these are missing, please contact Oricom directly.
If you do, you must connect an in line filter (not supplied) between the
telephone socket and your Slim base to ensure that your broadband and
Slim will work properly. If you do not install the filter you will experience
interference on the Slim and your Broadband may suffer dropouts. Please refer
to the user guide of the in line filter for installation.
Slim8000/ Slim8000/ Slim8000/
8800-1
1
8800-2
1
8800-3
1
Base units
Cordless handsets
1
0
2
1
2
1
Charging cradle and
power adaptor
Base Stand
Insert the base stand into the base unit with the four tabs on the
cradle towards to the holes on the base unit.
Power adaptors
Line cord
1
1
1
1
1
1
1
1
1
User guide
Handset Rechargeable
AAA Ni-MH Batteries
(1.2V 550mAh)
holes
2
4
6
tabs
base stand
Purchasing additional handsets
You may expand your Slim by adding more handsets (slim8050).
These can be purchased separately from the retailer where you
holes
tabs
Push the base stand up towards the base unit until it locks in place.
GETTING STARTED 8
Wall mounting
wall bracket (supplied)
IMPORTANT
Before you wall-mount your Slim, check that you are not drilling into any
hidden wiring. Before you drill, make sure the power and telephone line cables
will reach the sockets.
holes
lugs
Method A. To fit the wall bracket (supplied) to an
existing telephone wall plate with modular connector
simply;
1. Remove the base stand from the slim base unit if it was fitted.
2. Fit the wall bracket (supplied) over the existing wall plate, slide
down until it locks in place.
3. Plug the AC adaptor cord into the base unit.
4. Plug the short telephone line cord (supplied) into the base unit
and plug the other end into the telephone wall plate socket.
5. Tuck the small line cord in the space provided, then position
the mounting holes on the base unit over the two protruding
plastic lugs on the wall bracket.
6. Gently push the base unit against the wall bracket then slide
the base downwards locking it into place.
Method B. Attach the Wall bracket (supplied) directly to a wall
1. Choose a suitable position to wall mount the base ensuring the
telephone line cord and the AC adaptor will reach the phone
socket and power point.
2. Mark out and drill two holes vertically, one above the other 100mm
apart (use the wall bracket as the template). Fix 2 screws (supplied)
leave the screw heads protruding from the wall by 5mm.
3. Plug the telephone line cord (supplied) into the base unit and
plug the other end into the telephone wall plate socket.
4. Plug the AC adaptor cord into the base unit.
5. Feed the line cord and the AC adaptor cable through the gap between
the base unit and the wall bracket, then position the mounting holes on
the base unit over the two protruding plastic lugs on the wall bracket.
6. Gently push the base unit against the wall bracket then slide
the base downwards locking it into place.
7. Plug the AC adaptor into a power point.
7. Plug the AC adaptor into a power point and connect the line
cord to the phone socket.
8
Place the handset in the base unit to charge.
9 GETTING TO KNOW YOUR PHONE
Overview of the Handset
Redial / Clear / Back / Mute
Clear incorrect input during text editing
Back / to return to previous menu
Mute microphone during call
Earpiece
When the appears press this key to see
more information on screen
Menu / OK
Use to access and select
the options in the menu
From standby screen, press to access
Dialled Calls list
Talk / Recall
Call log / Scroll Up / Volume up
Call Log and shortcut to Answer
Machine menu
Phonebook / Scroll
Down / Volume down
End Call / Exit / Switch
Handset on/off
HASH - to switch between letter
case during text editing
Keypad lock
Handsfree
Intercom - to make a internal call
GETTING TO KNOW YOUR PHONE 10
Handset display
Handset Battery Level
Displays the current power levels of your handset
battery.
Answering machine
Displayed when the answering machine is on. Flashes
slowly when you have new messages. Flashes quickly
when the memory is full.
Signal
Steady when the handset is registered and within
range of the base. Flashes when the handset is out of
range or searching for base.
In Use
Displayed when the line is in use and flashes when
there is an incoming call.
OK
Press the [
an option on screen.
] key to select and confirm a setting or
Missed Calls
Displayed when you have missed calls and new
number(s) in the Calls list.
UP and Down
Press [ ] or [ ] to scroll through the options in
a menu, to open the phonebook or calls list when in
standby.
Phonebook
Displayed when you are viewing the phonebook list.
Alarm
Back
The alarm clock has been set.
Press [
] to go back to the previous menu option,
Handsfree
Displayed when in handsfree mode.
to cancel an action or to delete a character.
Silent
Handset ringer is off: set to silent.
11 GETTING TO KNOW YOUR PHONE
Overview of the base
Navigating the menu
The basic steps of navigating through the menu and on-screen
options.
Play/Pause
1. From the standby screen, press [
opened.
]. The main menu is
Switch the answer
machine on/off
LED Message Indicator
2. Use the [ ] or [ ] keys to scroll through the menu.
3. Soft key options OK and are displayed. Press [
] to
select OK and open a sub-menu or validate an option.
Delete
message
4. Press [
correct a character or cancel an action.
5. Press [ ] to return to standby.
] to select and go back to previous menu level,
If you do not press any button on the handset for 15 seconds the display will
automatically return to standby. It will also return to standby when the handset
is placed on the base or charger.
Charging contacts
Skip Forwards/ Volume up/down
Backwards
Page button
In standby, press to ring the handset (s).
Press and hold to enter registration mode
when registering handsets.
Flashes if you have received
answering machine message.
a
new
GETTING TO KNOW YOUR PHONE 12
Menu map
PHONEBOOK
NEW ENTRY
LIST ENTRY
CLOCK/ALARM
DATE & TIME
SET ALARM
¬ OFF
¬ ON ONCE
¬ ON DAILY
ALARM TONE
PERSONAL SET
HANDSET TONE
¬ RING VOLUME
¬ RING MELODY
¬ GROUP MELODY
¬ KEY TONE
HANDSET NAME
AUTO PICK-UP
AUTO HANG-UP
BABYSIT MODE
BACKLIGHT
ADVANCED SET
RECALL TIME
CALL BARRING
REGISTRATION
¬ SELECT BASE
¬ REGIST. BASE
UNREGISTER
PIN
RESET UNIT
PREFIX
SEL. COUNTRY
INTRUSION
ANSW MACHINE
PLAY
DELETE ALL
RECORD MEMO
ANSWER MODE
¬ ANSWER &REC
¬ PREDEFINED
¬ PLAY
¬ PERSONALIZED
¬ PLAY
¬<NAME>
¬ EDIT ENTRY
¬ DELETE ENTRY
DELETE ALL
DIRECT MEM
¬ RECORD MESS
¬ DELETE
¬ ANSWER ONLY
¬ PREDEFINED
¬ PLAY
¬ PERSONALIZED
¬ PLAY
¬ RECORD MESS
¬ DELETE
ANSW ON/OFF
ANSW SETTING
¬ RING DELAY
¬ REMOTE ACC
¬ HS SCREENING
¬ TAM LANGUAGE
13 USING THE PHONE
TIP
Using the phone
To Make a call
Instead of scrolling to browse the phonebook entries, press the numeric key
corresponding to the first letter of the entry you wish to locate. For example,
pressing 2 will show the entries starting with A. Pressing 2 again will show the
entries starting with B, etc...
1. Press [ ].
Call from the calls list
2. Dial the telephone number.
Note: You need to subscribe to your network’s Caller ID service to be able to
see the caller’s number in the calls list.
To Make a call by Pre-dialling
1. Press [ ] to enter CALL LOG menu. You have the options
1. Enter the phone number (maximum 24 digits). If you make a
to access CALL LIST or ANSWER MACHINE. Press [
enter CALL LIST. The first entry in the call list is displayed.
2. Scroll [ ] or [ ] to select.
] to
mistake press [
].
2. Press [ ]to dial the phone number entered.
3. Press [ ] to dial the number.
To Make a call by speed dial (keypad 1 to 9)
1. Press and hold a key from 1 to 9 until the number is displayed
and dialled. If no number is stored, you hear a beep.
Answer a call
1. When the phone rings and flashes in the display, press
[
] or press [ ] to answer the call via the loudspeaker. When
Call from the phonebook
answering the handset from the base with ‘Auto Pick up mode’
set to On, nothing needs to be pressed.
1. Press [ ]. The first entry in the phonebook is displayed.
2. Scroll UP [ ] or [ ] to the entry you want.
3. Press [ ]to dial the number.
NOTE
If you have subscribed to your Network’s Caller ID service and assigned a VIP Group to
the caller’s number, the caller’s details are displayed before the phone starts ringing.
You can set your phone to give the default ringtone as soon as the call is received then
once the caller’s identity is displayed, the assigned ringtone will start.
USING THE PHONE 14
To switch handset on/off
TIP
If Auto Pick up mode is on, simply lift up the handset from its base to answer
the call. The default setting is On. If you have changed Auto Pick up mode to
Off, you will need to press [ ] to answer a call.
1. Press and hold [ ] until the handset switches off.
2. Press and hold [ ] again to switch the handset back on.
Note
NOTE
if the handset is turned off, the phone will not ring.
An incoming call has priority over other events. Whenever there is an incoming call, other
operations in progress such as phone settings, menu navigation, etc. will be ended.
To call a second external number
Put an external caller on hold to make a second external call. You can
then switch between both callers or hold a 3-way conference call.
To adjust the volume
1. During a call, press [ ] or [ ] to adjust the earpiece or
loudspeaker volume. The level is shown in the handset display.
1. During your call, press [
]. Scroll [ ] to INIT 2ND CALL.
2. Press [
]. Display shows CALLING R.
To mute the microphone
Mute the microphone so that you can talk to someone else in the
room without your caller hearing you.
3. Enter the second number.
4
When your second caller answers, press [
] to open the
option menu:
1. During a call, press [
]. The microphone is muted.
CONFERENCE - press [
] to initiate a 3-way with an
2. Press [
] again to turn the microphone back on.
external caller and internal caller.
SWITCH CALLS - press [ ] to switch between the two callers.
5. Press [ ] to hang up.
To end a call
1. Press [ ].
After you hang up, the duration of your call is displayed for 5 seconds.
NOTE
If auto hang-up is on, replace the handset on the base to end the call. The
default setting is ON.
15 USING THE PHONE
•
If more than two handsets are registered to the base, their
numbers are displayed, e.g. 2345*. Enter the number of the
handset you want to call or press [ ] to ring all handsets.
Multi-handset Operation
Your Slim can have up to 5 handsets registered to the base unit.
Each handset has its own number HS-1, HS-2, HS-3, HS-4 and
HS-5 shown on the left-hand side of the display.
2. Press [ ] to hang up.
With 2 or more handsets you can:
NOTE
•
•
•
•
Make intercom calls while on an external call
Switch between an external call and intercom call
Transfer an external call from one handset to another
Set a 3-way conference call between yourself, an external call
and intercom call
If the handset does not belong to the Slim range, this function may not be available.
To transfer an external call to another handset
1. During an external call, press [
2. Enter the number of the handset you want to call or press
] to ring all handsets. If there are only two handsets, the
]. Your caller is put on hold.
NOTE
[
•
•
•
A maximum of 1x external call and 2x intercom calls can take
place at the same time.
If you make an external call + another handset is on line =
result is a busy tone.
You can make an intercom call when the other handset is in
progress.
other handset is called automatically.
3. When the other handset answers, announce the caller then
press [ ] to transfer the call. If the other handset does not
answer, press [
] to talk to your caller again.
To switch between an internal and external call
1. During an external call, press [
]. Your caller is put on hold.
To call another handset: intercom
This feature is only available when there are at least 2 registered
handsets. It allows you to make internal calls, transfer external calls
from one handset to another and use the conference option.
2. Enter the number of the handset you want to call or press
[
] to ring all handsets. If there are only two handsets, the
other handset is called automatically.
1. Press [
].
3. When the other handset answers you can speak privately to
your internal caller.
•
If you have two handsets, the other handset is called automatically.
USING THE PHONE 16
4. Press [
]to switch between both callers.
Call waiting (Australia Only)
5. Press [ ] to hang up.
You can use the recall function to answer a second call while you
are on the phone. However this service needs to be turned on. For
example, to turn on Telstra’s Call Waiting service:
To make a three way conference call
1. Press [ ] on the cordless handset to wait for dial tone then
1. During an external call, press [
]. Your caller is put on hold.
press[ ] [
] [
] [ # ].
2. Enter the number of the handset you want to call or press
2. You will hear a service tone then press [ ] again.
[
] to ring all handsets. If there are only two handsets, the
other handset is called automatically.
Take two different calls at the same time
During a call, you will hear two loud beeps periodically to notify you
of another incoming call. If you wish to answer this call,
3. When the other handset answers, announce the call then press
and hold [
] to connect both calls. If the other handset does
not answer, press [
] to talk to your caller again.
1. Press [ ] key. You will hear a dial tone.
4. Press [ ] to hang up.
2. Press [
] to put the current call on hold and talk with the
second caller.
Recall feature
3. Repeat steps 1-2 to swap between the two callers.
Recall feature can be used when you are using some services
provided by your network operators such as “call waiting”, etc. A
subscription may apply for these services, contact your network
operator for more information.
Recall function when connected to a PBX
If you have connected this telephone to an office PBX, you can use
all the facilities such as call transfer, automatic recall, etc. The
While you are talking on the phone, press [ ] key on the cordless
handset to send a Recall.
[
] key provides access to these facilities. If you need to change
the Recall setting for use on an office PBX system follow the
instructions on page 30.
17 PHONEBOOK
5. Enter a number. Press [
] to save. Press [ ] or [
]
Phonebook
The Slim handset phonebook can store up to 100 names and
numbers.
to select NO GROUP, GROUP A, B or C and press [
confirm.
] to
6. Press [ ] to return to standby.
NOTE
NOTE
You can assign individual contacts to specific groups of your choice. For
example, Group A contains phone numbers of all your co-workers. You can also
assign a specific ring melody to that group (see Group melody). You can benefit
from this feature only if you have subscribed to Caller ID service from your
network provider. If it is the case, every time someone from that group calls
you, you will hear the designated ringtone for that group.
Numbers can be up to 24 digits long and names up to 12 characters long.
Entries are stored in alphabetical order.
To view and dial phonebook entries
1. Press [ ]. Display shows the first entry.
2. Scroll [ ] or [ ] to the entry you want. Or to search
alphabetically, press [ ] then press the key with the first
letter of the name, e.g. if the name begins with N, press 6
twice. The display shows the first entry beginning with N. If
required, press [ ] or [ ] to scroll to the exact entry.
Cancel storing an entry by pressing [ ] at any time during the process.
Entering names
Use the alphanumeric keypad to enter names in the phonebook.
For instance to enter the name Paul
P
A
U
L
Press [
Press [
Press [
Press [
] once
] once
] twice
] three times
3. Press [ ] to dial the entry displayed.
To store an entry
1. Press [
2. Press [
3. Press [
]. PHONEBOOK is displayed.
]. NEW ENTRY is displayed.
]. ENTER NAME is displayed.
To enter a space press 1
Press [
] to delete a character or press and hold [
] to
delete all characters.
4. Enter a name and press [
].
PHONEBOOK 18
Character map
Enter a pause
If your Slim is connected to a switchboard, you may need to enter
a pause in a stored number. This gives the switchboard time to get
an outside line. A Pause is normally stored after the switchboard
access code (e.g. 0)
Key
characters and symbols
Space 1
-
<
2
3
4
5
6
S
8
Z
\
>
*
1. When storing a number, press and hold [ # ] until the display
A
D
G
J
B
E
H
K
N
Q
U
X
-
C
F
I
shows P. You can then continue storing the phone number.
To view an entry
In standby:
1. Press [ ].
L
O
R
V
Y
/
2. Enter the first letter of the name to search alphabetically then
scroll [ ] or [ ] to the exact entry. The name is displayed.
M
P
3. Press [
] to display the number. If there are more than 12
] again to see the rest of the number.
digits, press [
7
?
9
#
4. Press [ ] to return to standby.
T
During a call:
1. Press [
] twice to open the phonebook menu.
W
0
2. Follow to the above 2~3 steps to operate.
3. Press [ ] to cancel the phonebook display.
4. Press [ ] again to end the call.
+
19 PHONEBOOK
To edit an entry
To delete all entries
1. Press [ ].
1. Press [
2. Scroll [ ] or [ ] to DELETE ALL and press [
3. Display shows CONFIRM?. Press [ ].
Press [ ] to return to standby.
] twice.
2. Scroll [ ] or [ ] to the entry you want to edit and press
].
[
]. EDIT ENTRY is displayed. Press [
] again.
3. Edit the name and press [
characters.
] to confirm. Use [ ] to delete
4
To copy the phonebook to another handset
4. Press [
5. Press [
] and edit the number.
] to confirm.
1. Press [
2. Scroll [ ] or [ ] to PB TRANSFER and press [
3. Scroll [ ] or [ ] to the number of the handset you want the
phonebook copied to. Press [ ].
4. When the message “TRANS. FROM HANDSET X” appears on
] twice.
].
6. Scroll [ ] or [ ] to select NO GROUP, GROUP A, B or C and
press [ ] to confirm.
7. Press [ ] to return to standby.
To delete an entry
the destination handset, press [
the copy process.
] on the handset to start
1. Press [ ].
2. Scroll to the entry you want to delete and press [
].
5. When “DONE!” appears on both handsets press [ ] to return
to standby.
3. Scroll [ ] to DELETE ENTRY and press [
].
4. Display shows CONFIRM?. Press [
].
NOTE
5. Press [ ] to return to standby.
If an entry with the same name and number is already stored in the receiving
handset, it will not be copied across.
PHONEBOOK 20
To store a phonebook entry as a speed dial number
To delete a speed dial number
The keys [ ] to [ ] enable one touch speed dialling of entries
stored in the phonebook.
1. Press [
and press [
] twice then scroll [ ] or [ ] to DIRECT MEM
].
1. Press [
] twice.
2. Scroll [ ] or [ ] to select KEY 1- 9.
Press [ ] to display the current entry. Press [
open the options menu.
4. Scroll [ ] or [ ] to DELETE and press [
2. Scroll [ ] or [ ] to DIRECT MEM and press [
].
3
] again to
3. Press [ ] or [ ] to select KEY 1 - 9 and press [
current entry, if any, is displayed.
]. The
].
4. Press [
5. Press [
] again to open the options menu.
5. Display shows CONFIRM?. Press [
].
] to ADD an entry from the phonebook.
6. Press [ ] to return to standby.
6. Scroll [ ] or [ ] to the entry you want. Press [
confirm or [ ] to return to standby.
] to
21 CALLER ID
To view the calls list
Caller ID
1. Press [ ] to enter CALL LOG option menu, then press [
]
to enter CALL LIST.
If you subscribe to your telephone operators service (charges may
apply), numbers of the incoming calls will be displayed on the
screen and stored in the call log (please consult your telephone
service provider for details).
The most recent number or name if stored in the phonebook is
displayed. New calls are marked with icon flashing.
2. Scroll [ ] or [ ] through the calls log. At the end of the log,
you will hear a beep.
NOTE
If the caller’s number is stored in your phonebook along with a name, the
name will also be displayed.
Press [
] to see the number. If the number has more than
] to see the rest of the number.
12 digits, press [
If the telephone number is not available for incoming calls, the handset will
display UNAVAILABLE. If the incoming callers number is blocked, the display
will show WITHHELD.
3. Press [ ] to return to standby.
Information about incoming calls will vary by country and network operator.
Some operators may charge a subscription for their Caller ID service.
The received and missed calls log holds details of up to 50 calls. The calls list
contains details of missed and received call. Details include the date and time
of the call. Entries are displayed in chronological order with the most recent
call at the top of the list.
When the calls list is full, a new call replaces the oldest in the list.
If you receive more than one call from the same number, only the most recent
call is kept in the calls list.
When you have missed calls (incoming calls that you haven’t answered) the
icon will be displayed in the display on all handsets registered to the base.
If one handset is used to view the calls log, the icon on the other handsets
continue to flash (Multipack user only).
NOTE
The
icon stops flashing once all new calls have been viewed.
To dial from the calls list
1. Press [ ] to enter the CALL LOG option menu, then press
[
] to enter CALL LIST. The most recent call is displayed.
2. Scroll [ ] or [ ] to the entry you want.
3. Press [ ] or [ ] to dial.
CALLER ID 22
To save a number from the calls list to the phonebook
To delete entire calls list
1. Scroll [ ] to enter the CALL LOG option menu, then press
1. Scroll [ ] to enter the CALL LOG option menu, then press
] to enter CALL LIST. The most recent call is displayed.
2. Scroll [ ] or [ ] to DELETE ALL and press [ ].
] to confirm. Press [
[
] to enter CALL LIST. The most recent call is displayed.
[
2. Scroll [ ] or [ ] to the number you want.
3. Press [
4. Press [
]. SAVE NUMBER is displayed.
3. Display shows CONFIRM?. Press [
]
to return to standby.
]. ENTER NAME is displayed. Use the keypad to
enter the name.
To redial the last number
The Slim lets you redial any of the last 10 numbers called. Numbers
can be up to 24 digits long.
5. Press [
] then the number is displayed, the user can then
edit the number if required and must press [
number (even if has not been edited).
6. Press [ ] or [ ] to select NO GROUP, GROUP A, B or C and
press [ ] to confirm.
] to save the
1. Press [
If the number has more than 12 digits, the display shows and
the cursor blinks. Press [ ] to display the rest. If the number
] . The last number dialled is displayed.
7. Press [ ] to return to standby.
is stored in the Phonebook, the name is displayed as well.
2. Press [ ] to dial.
To delete a calls list entry
1. Scroll [ ] to enter the CALL LOG option menu, then press [
]
to enter CALL LIST. The most recent call is displayed.
2. Scroll [ ] or [ ] to the number you want.
3. Press [
].
] then scroll [ ] or [ ] to DELETE and press
[
4. Display shows CONFIRM?. Press [
] to confirm.
5. Press [ ] to return to standby.
23 CALLER ID
To view and dial a number in the redial list
To delete a redial list entry
1. Press [
]. The last number dialled is displayed. If required,
1. Press [
want.
]. Scroll [ ] or [ ] to display the number you
scroll [ ] or [ ] to display the number you want.
2. Press [ ] to dial the number.
2. Press [
] and scroll [ ] to DELETE then press [
].
3. Display shows CONFIRM?. Press [
] to confirm, then [
]
To copy a redial number to the phonebook
to return to standby.
1. Press [
2. Press [
] and scroll [ ] or [ ] to the entry you want.
].
To delete entire redial list
1. Press [
] then press [
].
3. Display shows SAVE NUMBER. Press [
4. Enter the name and press [ ].
5. Edit the number if required and press [
].
2. Scroll [ ] or [ ] to DELETE ALL and press [
].
] to confirm. Press [
3. Display shows CONFIRM?. Press [
]
].
to return to standby.
6. Press [ ] or [ ] to select NO GROUP, GROUP A, B or C and
press [ ] to confirm.
7. Press [ ] to return to standby.
CLOCK & ALARM 24
To set alarm
Clock & Alarm
1. Press [
].
2. Scroll [ ] or [ ] to SET ALARM and press [
3. Scroll [ ] or [ ] to OFF, ON ONCE or ON DAILY and press
].
], scroll [ ] or [ ] to CLOCK/ALARM and press
[
If you subscribe to your network’s Caller ID service, the time on
the unit may be set automatically each time you receive a call,
depending on your network provider.
].
You can also set or adjust the time manually using the Clock &
Alarm menu.
[
4. If you select ON ONCE or ON DAILY, enter the time using the
24 hour format HH - MM e.g 14:45 for 2:45pm and press
To set date and time
[
].
1. Press [
] and scroll [ ] or [ ] to CLOCK/ALARM. Press
].
5. Press [ ] to return to standby. When the alarm goes off, press
any key to stop the ring.
[
]. Display shows DATE & TIME, then press [
2. Enter the date using the format DD/MM e.g. 04/ 08 for 4th
August.
NOTE
Once the alarm is set to on, the
medium level. ALARM ON and the
3. Press [
] and enter the time using the 24 hour format
icon is displayed. The alarm will ring at the
will flash on the display.
HH:MM, e.g. 14:45 for 2.45pm.
4. Press [
] to confirm.
To set alarm melody
5. Press [ ] to return to standby.
There are three alarm ringtones.
1. Press [
] and scroll [ ] to CLOCK/ALARM. Press [
].
NOTE
The date and time is retained during a power failure or when the batteries are
discharged.
2. Scroll [ ] to ALARM TONE and press [
]. Melodies are
played.
3. Scroll [ ] or [ ] and press [
].
25 PERSONAL SETTINGS
5. Press [ ] to return to standby.
Personal settings
To set a Group melody
To benefit from this feature, you must subscribe to the Caller ID
service. This menu enables you to select and set the melodies to be
played when there is an external incoming call from a contact whose
name is stored in your phonebook and is part of a group. You can
associate 1 ring melody to each group. There are three phonebook
groups (Group A, B, C) available for you to organize your contacts.
Each group can be assigned a unique melody.
To set the ring volume
1. Press [
].
], scroll [ ] or [ ] to PERSONAL SET and press
[
2. HANDSET TONE is displayed. Press [
].
3. RING VOLUME is displayed. Press [
].
1. Press [
].
2. HANDSET TONE is displayed. Press [
] to GROUP MELODY. Press [
3. Scroll [ ] or [ ] to select: GROUP A, B or C, then press
].
4. Press [ ] or [ ] to select the ringtone you want for the
group and press [ ].
5. Press [ ] to return to standby.
], scroll [ ] or [ ] to PERSONAL SET and press
4. Scroll [ ] or [ ] to adjust the ringer volume level. Choose
from: RINGER OFF, LOW, MEDIUM, HIGH, BOOST and
PROGRESSIVE (increasing ring volume). The default setting is
High.
[
] and scroll [ ] or
[
].
5. Press [
] to save the settings.
[
6. Press [ ] to return to standby.
To set the ring melody
1. Press [
], scroll [ ] to PERSONAL SET and press [
].
2. HANDSET TONE is displayed. Press [
] and scroll [ ] or
[
] to RING MELODY. Press [
].
3. Press [ ] or [ ] to select the ringtone. Choose from 10
ringer melodies. A sample of the ringtone is played.
4. Press [
] to confirm.
PERSONAL SETTINGS 26
To set the Key tones on/off
To set auto pick up answer
When you press a key on the handset you hear a beep. You can
switch these beeps on or off.
With Auto pick up switched on, you can answer a call just by lifting
the handset off the base or charger. If switched off, you will have to
1. Press [
].
2. HANDSET TONE is displayed. Press [
] to KEY TONE. Press [ ].
3. Scroll [ ] or [ ] to select ON or OFF.
4. Press [ ] to confirm.
], scroll [ ] or [ ] to PERSONAL SET and press
press [ ] to answer a call. The default setting is On.
1. Press [ ], scroll [ ] or [ ] to PERSONAL SET and press
].
[
] and scroll [ ] or
[
[
2. Scroll [ ] or [ ] to AUTO PICK UP. Press [
].
3. Scroll [ ] or [ ] to select ON or OFF.
4. Press [
] to confirm.
5. Press [ ] to return to standby.
5. Press [ ] to return to standby.
To change the handset name
To set auto hang up
Personalise your handset, with a name or location for example
Peter or Bedroom. Maximum 10 characters.
With Auto hang up switched on, you can end a call just by replacing
the handset on the base or charger. If switched off, you have to
press [ ] to hang up. The default setting is On.
1. Press [
].
2. Scroll [ ] or [ ] to HANDSET NAME and press [
current name is displayed.
3. Press [ ] to delete the current name.
4. Enter the name you want, maximum 10 characters and press
] to save.
5. Press [ ] to return to standby.
], scroll [ ] or [ ] to PERSONAL SET and press
[
1. Press [
].
], scroll [ ] or [ ] to PERSONAL SET and press
[
]. The
2. Scroll [ ] or [ ] to AUTO HANG UP. Press [
].
3. Scroll [ ] or [ ] to select ON or OFF.
4. Press [
] to confirm.
[
5. Press [ ] to return to standby.
27 PERSONAL SETTINGS
To set babysit mode on
To set the backlight on/off
Leave one handset in a room and use another handset to hear
sounds in that room.
1. Press [
].
], scroll [ ] or [ ] to PERSONAL SET and press
[
1. Press [
].
], scroll [ ] or [ ] to PERSONAL SET and press
2. Scroll [ ] or [ ] to BACKLIGHT. Press [
].
[
3. Press [ ] or [ ] to select ON or OFF.
2. Scroll [ ] or [ ] to BABYSIT MODE. Press [
].
4. Press [
] to confirm.
3. Press [ ] or [ ] to select ON or OFF.
To lock the Keypad
4. Press [
] to confirm.
Prevent accidental dialling while carrying the handset by locking
the keypad.
When switched On, you can leave this handset in the room
you wish to monitor. Only the microphone is on. Anyone in the
room cannot hear you.
1. Press and hold [ ]. The display shows KEYS LOCKED.
5. Place that handset in the room.
2. To unlock the handset, press and hold [ ] again.
6. At a second handset, press [
] and enter the number of the
NOTE
handset you are using as a room monitor. You can now hear
sounds coming from the room.
While the keypad is locked, you can answer incoming calls as normal.
To stop room monitoring at any time, press [ ].
ADVANCED SETTINGS 28
The user has the option to adjust the time to short, medium or long (100, 250, or
600) if the unit is being used in a situation that differs from the network standard.
The default recall time is suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
Advanced settings
This setting is useful to access certain network and PBX/
switchboard services.
Call barring
Prevent certain numbers from being dialled from your Slim. Store
up to four specific numbers, each up to 4 digits, for example,
international or local prefixes.
To set the Recall time
You can use the Recall button on your telephone when using your
network operator’s services such as call waiting etc. A subscription
may apply for these services contact your network operator for
more information. If this function is not working correctly change
the setting using the instruction below:
NOTE
If you switch Call barring on, BARR MODE ON will be displayed on your screen
in standby mode.
1. Press [
].
2. RECALL TIME is displayed. Press [
], scroll [ ] or [ ] to ADVANCED SET and press
To switch call barring on/off
[
1. Press [
].
2. Scroll [ ] or [ ] to CALL BARRING. Press [
3. Enter the master PIN (default setting 0000) and press [
4. MODE is displayed. Press [ ].
5. Press [ ] or [ ] to select ON or OFF. Press [
], scroll [ ] or [ ] to ADVANCED SET and press
].
[
3. Press [ ] or [ ] to select the setting you want: SHORT,
].
MEDIUM, LONG.
].
4. Press [
] to confirm.
5. Press [ ] to return to standby.
] to confirm.
Note
6. Press [ ] to return to standby. You can now set the number
(See below).
Recall 1 (Short) has been set to 100ms and Recall 2 (medium) has been set to
250ms and Recall 3 (long) has been set to 600ms. Recall 1 = Australia (100ms),
Recall 3 = New Zealand (600ms). The default is Recall 1.
29 ADVANCED SETTINGS
To set a number to be barred
To Reset your Phone
This will reset your Phone to its default settings.
1. Press [ ], scroll [ ] or [ ] to ADVANCED SET and press
].
2. Scroll [ ] or [ ] to RESET UNIT. Press [
1. Follow the above procedures to enter the CALL BARRING
menu.
[
2. Scroll [ ] or [ ] to NUMBER. Press [
].
].
3. If necessary, scroll [ ] or [ ] to the next available slot.
3. CONFIRM? is displayed. Press [
].
4. Press [
Press [
] and enter the number or prefix you want to bar.
] to confirm.
NOTE
5. Press [ ] to return to standby.
Entries stored in the phonebook and new answering machine messages are
retained.
To set the PIN
Auto prefix
The 4-digit master PIN is used when registering or unregistering
a handset and when changing some settings on your Slim. The
default setting is 0000. You can change this PIN for more security.
You can set the Slim to detect a dialling number and replace it with
another number. The number to be detected can be up to 5 digits
long. It can be replaced with a number up to 10 digits.
1. Press [
].
2. Scroll [ ] or [ ] to PIN. Press [
], scroll [ ] or [ ] to ADVANCED SET and press
1. Press [
].
], scroll [ ] or [ ] to ADVANCED SET and press
[
[
].
2. Scroll [ ] or [ ] to PREFIX. Press [
].
3. Enter the current 4 digit master PIN and press [
(Default setting 0000).
].
3. DETECT DIGIT is displayed. Press [
].
4. Enter the number you want to be detected (up to 5 digits) and
press [ ].
5. Scroll to PREFIX NUM. and press [
4. Enter the new PIN and press [
].
NOTE
].
Make a note of your PIN. If you forget your PIN you will need to reset your product.
ADVANCED SETTINGS 30
6. Enter the number you (up to 10 digits) want it replaced with
and press [ ].
To turn intrusion on
When an external call is taking place, another handset registered
to the base can join in, making the call a 3-way conference, just by
pressing [ ]. To enable this, Intrusion must be switched On.
7. Press [ ] to return to standby.
1. Press [
].
], scroll [ ] or [ ] to ADVANCED SET and press
NOTE
[
If you do not enter a number for “Detect Digit” then the “Prefix number” will be
dialled prior to the number you call, (useful for access to “lo-cost” telephone
service access). To disable the auto-prefix function, delete the contents in both
“Detect digit” and “Prefix number” settings.
2. Scroll [ ] to INTRUSION. Press [
].
3. Scroll [ ] or [ ] to ON or OFF.
4. Press [
] to confirm.
The auto-prefix function will not work if you Press TALK before dialling.
5. Press [ ] to return to standby.
To set Country
1. Press [
].
2. Scroll [ ] or [ ] to SEL. COUNTRY. Press [
3. Enter the 4 digit master PIN and press [ ].
4. Scroll [ ] or [ ] to select Australia or New Zealand.
5. Press [ ] to confirm and [ ] to return to standby.
], scroll [ ] or [ ] to ADVANCED SET and press
[
].
31 REGISTRATION
4. If necessary, scroll [ ] or [ ] to display REGIST. BASE and
press [ ].
Registration
5. BASE 1 2 3 4 is displayed and the registered base number is
flashing.
Register new handsets on the Slim base
The handsets which come in the same pack are already registered
to the base. If you buy new handsets, you need to register them
before use.
6. Enter the number 1.
7. When the display shows PIN----, enter the base PIN.
8. When the handset registers with the base, it is assigned a
handset number.
1. Charge the batteries (for 15 hours).
2. Register the handset (to the base unit).
Each base can register up to 5 handsets.
To unregister a handset
•
The Master PIN is required before you can register or
unregister handsets. The default PIN is 0000.
1. Press [
press [
] and scroll [ ] or [ ] to ADVANCED SET and
].
2. Scroll [ ] or [ ] to UNREGISTER and press [
].
To register a handset
3. Enter the 4 digit master PIN and press [
the registered handset numbers.
]. Display shows
On the base:
1. Press and hold the [
] button on the base station for at
least 3 seconds. You have 90 seconds in which to register a
handset.
4. Scroll [ ] or [ ] to select the handset you want to delete
and press [
screen.
]. UNREGISTERED is displayed on the handset
On the handset:
2. Press [
press [
] and scroll [ ] or [ ] to ADVANCED SET and
].
3. Scroll [ ] or [ ] to REGISTRATION and press [
].
(Slim8800 ONLY)
USING THE ANSWERING SYSTEM
32
To set answer mode
Using the Answering
Set your machine to Answer & Record or Answer Only.
1. Press [ ] scroll [ ] or [ ] to ANSW MACHINE and press
].
[
system (Slim8800 ONLY)
Your answering machine records unanswered calls when it is
activated. It can store up to 59 messages within the maximum
recording time of 12 minutes. Each message can be up to 3
minutes long. Your personal outgoing messages can be up to 1
minute long.
2. Scroll [ ] or [ ] to ANSWER MODE and press [
]. The
current answer mode is displayed.
3. Scroll [ ] or [ ] to select ANSWER & REC or ANSWER
ONLY and press [ ].
4. Scroll [ ] or [ ] to display the message type you want:
PERSONALISED to set your own recorded message or
PREDEFINED for the pre-recorded message.
Outgoing messages
This is the message your callers hear on the answering machine.
There are two pre-recorded outgoing messages, or you can record
your own.
5. Press [
] to confirm.
If you select personalised you can record, play or delete your own
outgoing message.
Answer & Record
1. Press [
2. Scroll [ ] or [ ] to ANSWER MODE and press [
3. Scroll [ ] or [ ] to select ANSWER & REC or ANSWER
ONLY and press [ ]. Scroll [ ] or [ ] key to select
] scroll to ANSW MACHINE and press [
].
The caller can leave a message. The pre-recorded message is
‘Hello, your call cannot be taken at the moment, so please leave
your message after the tone.’
].
Answer Only
PERSONALISED then press [
].
The caller can listen to your announcement but cannot leave a
message. The pre-recorded message is ‘Hello, your call cannot be
taken at the moment, and you cannot leave a message, so please
call later’.
4. PLAY is displayed. Press [
]. Current message is played
back.
(Slim8800 ONLY)
33 USING THE ANSWERING SYSTEM
•
If the memory is full, it will answer after 14 rings in Answer
Only mode.
To record an outgoing message
1. Press [
] scroll to ANSW MACHINE and press [
].
].
1. Press [
].
2. Scroll [ ] to ANSW SETTINGS and press [
3. RING DELAY is displayed. Press [ ].
4. Scroll [ ] or [ ] to select 2 rings to 9 rings or TOLL SAVER.
] scroll [ ] or [ ] to ANSW MACHINE and press
2. Scroll [ ] or [ ] to ANSWER MODE and press [
[
3. Scroll [ ] or [ ] to select ANSWER & REC or ANSWER
ONLY and press [ ]. Scroll [ ] or [ ] key to select
PERSONALISED then press [ ].
PLAY is displayed. Scroll [ ] to RECORD MESS.
].
4
5. Press [
] to confirm.
To delete a personalised outgoing message
NOTE
1. Press [
2. Scroll [ ] or [ ] to ANSWER MODE and press [
3. Scroll [ ] or [ ] to select ANSWER & REC or ANSWER
ONLY and press [ ]. Scroll [ ] or [ ] key to select
PERSONALISED then press [ ].
] scroll to ANSW MACHINE and press [
].
When the answer machine is switched off it will still answer after 14 rings.
].
To switch the answering machine on/off
On the handset
1. Press [
].
2. Scroll [ ] or [ ] to ANSW ON / OFF and press [
3. Scroll [ ] or [ ] to display ON or OFF.
4. Press [ ] to confirm.
] scroll [ ] or [ ] to ANSW MACHINE and press
4. PLAY is displayed. Scroll [ ] or [ ] to DELETE.
[
].
Ring delay
Select the duration of rings before your answering machine picks
up the call. Choose from 2 rings to 9 rings or Toll Saver.
5. Press [ ] to return to standby.
If Toll Saver is selected, then:
•
•
If you have new messages your phone answers after 2 rings.
If there are no new messages it will answer after 6 rings. So you
have the option to hang up, saving the time and cost of a call.
On the base
1. Press [on/off] button to turn on or off the answer machine.
(Slim8800 ONLY)
USING THE ANSWERING SYSTEM
34
5. Press [ ] to stop playback and return to standby.
New Message
On the base
When you have received a new message the
will flash on the
1. Press [
2. Press [
] to play the message.
] again to stop playing.
handset screen and the amount of messages will be shown on the
base unit’s display.
3. Press [ ] to skip forward to the next message, press [ ] to
skip backward to the previous message.
To play messages
On the handset
To delete all messages
1. Press [
press [
] and scroll [ ] or [ ] to ANSW MACHINE and
]. PLAY is displayed.
On the handset
1. Press [
].
] scroll [ ] or [ ] to ANSW MACHINE and press
2. Press [
] to play new messages. The display shows the
[
number of new messages. If there are no new messages, all
stored messages are played.
2. Scroll [ ] to DELETE ALL and press [
3. Display shows CONFIRM?. Press [
On the base
].
3. Press [
] to display the callers identification. Press
] to confirm.
[
] again to see the date and time of the call. (This only
works if you subscribe to Caller ID service)
During message playing, press [x] to delete the message.
4. During playback press [
] to display a list of options. Use
To record a memo
the [ ] and [ ] keys to change the options:
You can record a memo which is stored on your answering machine
and played back like a normal message.
REPEAT press [
] to repeat current message
NEXT MESSAGE press [
] to play next message
1. Press [
].
2. Scroll [ ] or [ ] to RECORD MEMO and press [
Display shows RECORDING.
] scroll [ ] or [ ] to ANSW MACHINE and press
PREV MESSAGE press [
] to play previous message
[
DELETE press [
] to delete the current message.
].
SAVE NUMBER press [
the phonebook.
] to store the number, if available, in
(Slim8800 ONLY)
35 USING THE ANSWERING SYSTEM
3. Speak your message. Press [
] to end recording.
NOTE
When the answer machine is switched off it will still answer after 14 rings.
Remote access
Remote access allows you to operate your answering machine and
listen to your messages by calling your phone from another phone.
To turn Remote Access on/off
1. Press [
] scroll [ ] or [ ] to ANSW MACHINE and press [
].
,
The default setting is on.
2. Scroll [ ] or [ ] to ANSW SETTINGS and press [
].
1. Call your phone. When you hear your outgoing message, press
3. Scroll [ ] or [ ] to REMOTE ACC and press [
]
[ # ] .
4. Scroll [ ] or [ ] to select ACTIVATED or DEACTIVATED.
5. Press [ ] to confirm.
2. Enter your 4 digit PIN. The default code is 0000. You hear a
confirmation beep.
Call screening
Use your handset or base speaker to hear a caller leaving a message.
You can then choose to ignore the caller or pick up the call.
NOTE
You may change this default code for increased security, see ‘PIN’ .
3. After entering your PIN as stated above, use the keypad to
operate your answering machine:
The default settings are:
•
Handset call screening: On
2
1
3
6
7
8
9
Play messages
Play previous message
Play next message
To interrupt at the handset:
1. If you want to interrupt and take the call press [ ] or [ ].
Delete message playing
Switch answer machine on
Stop playback
Switch handset call screening on/off
1. Press [
press [
], scroll [ ] or [ ] to ANSW MACHINE and
].
2. Scroll [ ] or [ ] to ANSW SETTINGS and press [
3. Scroll to HS SCREENING and press [ ].
].
Switch answer machine off
(Slim8800 ONLY)
USING THE ANSWERING SYSTEM
36
4. Scroll [ ] or [ ] to select ON or OFF.
5. Press [ ] to confirm.
If the memory becomes full while a caller is leaving a message,
they will hear a beep and the call is ended.
To set TAM Language
To access the answering machine menu via the Calls list
1. Press [
press [
], scroll [ ] or [ ] to ANSW MACHINE and
].
When the
is flashing to indicate new messages you can
see caller details via [ ] or press [ ] again to go to ANSW
2. Scroll [ ] or [ ] to ANSW SETTINGS and press [
].
].
MACHINE to play new messages.
3. Scroll [ ] or [ ] to TAM LANGUAGE and press [
1. Press [ ], CALL LIST is displayed.
2. Press [ ], ANSW MACHINE is displayed.
3. Press [
4. Press [
], PLAY is displayed.
], the handset will start the new message
playback. Once all messages are played, the handset will
return to standby.
NOTE
During message playback, press [ ] anytime to return to standby.
Memory full
The memory is full if there is less than 15 seconds of recording time
left or if the maximum total of 59 messages has been reached.
When the memory becomes full:
•
•
•
The LED will flash quickly.
The
flashes quickly on the handset display.
The machine will automatically switch to Answer Only mode.
37 APPENDIX
Customer Support
If you feel this product is not working correctly
please consult the user guide and ensure that
you are using the product in accordance with the
instructions. Remove all extra telephone equipment
and connect only this telephone directly to the
telephone socket. If the fault is still present, connect
another telephone (if available) to the telephone
socket. The results will show you whether the fault
lies with this unit or with the telephone line.
To order spare parts additional handsets,
replacement batteries and in case of any technical
issues you may have with this product please
consult our website for further information or send
us an email for a prompt response to your enquiry.
In the unlikely event of a fault developing, please
contact us for assistance. If the product is then
found to be faulty you will be asked to return it
directly to us with a copy of the purchase receipt.
If the product is working correctly the fault is on
the telephone line. Please contact your network
operator for assistance.
APPENDIX 38
Troubleshooting
Problem
Possible cause(s)
Solution(s)
No dial tone on the
cordless handset.
1. The base unit is not properly connected.
2. Too far from the base unit.
3. Battery charge is low.
1. Check CONNECTION to power and telephone line.
2. Move handset CLOSER to base unit.
3. CHARGE battery.
4. Incorrect battery polarity.
5. Re-register handset.
4. RE-INSERT batteries and check + and
5. Handset not registered.
.
Antenna symbol is
flashing.
1. The handset is not registered. If the handset is
unregistered, it displays UNREGISTERED.
2. The handset is out of range.
1. REGISTER the handset.
2. Move CLOSER to the base unit.
3. Check power CONNECTION to the base.
3. The product is not properly connected.
No tone when the
cordless handset is
placed on the charger. 3. No power connection to base unit.
4. The handset’s power is turned off.
1. The handset is not placed properly on the charger.
2. Charging contacts are dirty.
1. Lift handset off the charger carefully and REPOSITION correctly.
2. CLEAN charging contacts with a clean and dry cloth.
3. Check power CONNECTION to the base.
4. CHECK batteries.
Handset charged for
24 hours but Battery
icon remains empty.
1. Handset batteries are defective.
2. Handset is not placed properly on the charger.
3. Battery installed incorrectly.
1. REPLACE with new AAA rechargeable Ni-MH batteries.
2. CHECK to make sure the battery icon is scrolling.
3. RE-INSERT batteries and check + and
4.Check power CONNECTION to the base.
.
4. The product is not properly connected.
No symbol on the
display.
1. Batteries are empty.
2. The product is not properly connected.
1. CHARGE batteries.
2. Make sure your product is properly PLUGGED-IN.
Can’t transfer a call.
1. Handset is busy.
2. Handset is out of range.
3. Wrong handset number.
1. Check ALL handsets and END all calls.
2. Move handset CLOSER to base unit.
3. Check HANDSET NUMBER.
39 APPENDIX
Problem
Possible cause(s)
Solution(s)
Bad audio quality
(crackles,echo, etc.).
1. Interference from nearby electrical appliance.
2. Base unit is installed in a room with thick walls.
3. The handset is too far from the base unit.
1. Try a different connection point, one that is away from
other electrical appliances.
2. Install the base unit in a DIFFERENT room OR use
EXTENSION leads.
4. If you have Broadband/ADSL you need an in line
filter (not supplied) connected where this product 3. Move CLOSER to the base unit.
connects to the phone socket.
5. Faulty telephone line.
4. Ensure a in-line ADSL filter is installed on all phone
sockets between wall plate and your phone.
5. Contact your network service provider to check your line.
Caller ID does not
work.
1. Service not activated with your Network service
provider.
2. Caller ID service is activated but does not work or
is is intermittent.
1. Check your SUBSCRIPTION with the SERVICE provider.
2. Ask your service provider to re set your caller ID
service.
Phone does not ring
1. The ringer is off.
1. Turn ON the ringer.
when a call comes in. 2. Too many phones are sharing the same phone line. 2. Disconnect some of the phones from the phone line.
3. Base unit not plugged in.
3. Check base unit CONNECTIONS.
Keypad does not work. Keypad may be locked.
UNLOCK the keypad.
Busy tone + in use
light on.
1. Other handset may still be connected.
2. Check power supply connection.
1. Check ALL handsets and END all calls.
2. Check CONNECTIONS to wall and base.
Handset registration
fails continuously.
The base memory may be fully charged.
Delete un-used handsets and try again.
Cannot make/answer 2nd call service can be activated.
a 2nd call.
Check with your service provider. Check the recall
selection is correct.
APPENDIX 40
Problem
Possible cause(s)
Solution(s)
1. Bad battery contact.
2. Dirty contact.
3. Battery is fully charged
1. Move the handset slightly.
2. Clean the battery contact with a dry cloth.
3. Its fine to leave on the base when fully charged.
The battery icon is
not scrolling when the
handset is placed on
the base.
A phonebook entry
cannot be stored.
The phonebook is full.
Delete any unused entries to free memory.
Slim 8800 Answering System (ONLY)
Answering machine
does not record
messages.
1. The answer machine may be turned off.
2. The memory may be full.
3. Answer mode may be set to ANSWER ONLY.
1. Switch the answering machine on.
2. Delete some messages.
3. Change the mode to ANSWER & REC.
Cannot access
messages remotely.
1. Remote access may be switched off.
2. Wrong PIN is entered.
1. Switch Remote access on.
2. Enter the PIN once again.
Cannot record
1. The memory may be full.
1. Delete messages.
outgoing message.
Answering machine
stops recording
part way through a
message.
1. The memory may be full.
2. The maximum message length is more than 3
minutes.
1. Delete messages.
NOTE
If none of the above solutions help, reset your phone by disconnecting the mains power from the base and removing all batteries from handset/s. Reconnect after
15 minutes.
Alternatively please contact Customer Service on 1300 889 785.
41 APPENDIX
Warranty Information (Australia)
(iii) any un-controlled external cause to the phone not functioning
(a) Warranty
including but not limited to electricity failure, lighting, over
voltage;
Oricom warrants that the product is free from defects in materials
and workmanship for a period of 12 months effective from the
date of purchase. This warranty in no way affects your statutory
warranty under the Trade Practices Act 1974 or any other similar
legislation. It is important that you read the Warranty Card as
it contains full and additional details of the warranty, limitation
of warranty and conditions for receiving the warranty services
during the warranty period. The Warranty Card is located in the
package. If you cannot locate the Warranty Card, please contact
our Customer Support Service on 1300 889 785.
(iv) non adherence by you to the warnings in the User Guide and
the User Guide generally;
(v) modification to the product or services carried out to the
product by anyone other than Oricom or on Oricom’s behalf.
Oricom will not be liable for consequential losses including loss of
profits arising from a cause of action in contract, tort or any other
statutory or common law (except where a statute or any law prohibits
this exclusion). The warranty does not extend to damage caused by
misuse, negligence, excessive voltage, faults on the telephone line or
lightning. This warranty in no way affects your statutory rights. Full
details of the warranty are contained in the enclosed warranty card.
(b) Exclusion and limitation of liability.
Oricom will not be in breach of a warranty or condition expressly
stated in this User Guide or the Warranty Card or implied by the
Trade Practices Act and excludes any liability arising under any
statutory or common law for damages or any other remedy if the
damage occurs as a result of:
(i) failure by you to follow the instructions in the User Guide for
the installation and proper functioning of the product;
(ii) negligence on your part or misuse by you of the product;
APPENDIX 42
Notes for operation in New Zealand
The grant of a Telepermit for any item of terminal equipment
indicates only that Telecom has accepted that the item complies
with the minimum conditions for connection to its network. It
indicates no endorsement of the product by Telecom, nor does it
provide any sort of warranty. Above all, it provides no assurance
that any item will work correctly in all respects with another item of
Telepermitted equipment of a different make or model, nor does it
imply that any product is compatible with all of Telecom’s network
services. This device may be subject to ringing or bell tinkle when
certain other devices are connected to the same line. If this occurs,
the problem should not be referred to the Telecom Faults service.
Caller ID
Customers using non Telecom toll services should not use the dial
back feature for local calls as this will incur a charge only the 7
digit number should be dialled. Some of the CID services listed may
not be available in New Zealand.
This equipment shall not be set to make automatic calls to the
Telecom “111” Emergency Service.
This equipment may not provide for the effective hand-over of a call
to another device connected to the same line.
REN (RN for New Zealand)
The REN (Ringer Equivalence Number) or (RN) is of significance only
if you wish to connect more than 1 telephone to your telephone
line. A standard telephone line has a maximum REN capacity of 3
(RN of 5). It is possible to connect 3 (5) devices with a REN of 1 (RN
of 1) with no degradation to the product’s performance. Exceeding
this limit may cause the volume of the ringer in any phone to
decrease or not ring at all.
Australia
Oricom International Pty Ltd
Locked Bag 658
New Zealand
Atlas Gentech (NZ) Limited
Private Bag 14927
South Windsor, NSW 2756
Panmure, Auckland
Customer Support
Email: [email protected]
Phone: 1300 889 785
Customer Support
Email: [email protected]
Phone: 0900 50 025 (Toll Call)
Fax: (09) 574 2722
Fax: (02) 4574 8898
|